Skip to the content
Spray Research Group

Publications

Book

  1. Industrial sprays and atomization: design, analysis and applications, Springer Verlag publisher, (500 pages), 1st Edition, ISBN 1852334606, June 2002.  Nasr G.G., Yule A.J., Bendig L.
    Industrial Sprays and Atomization front cover image
  2. Nasr GG, Yule AJ, Sprays Science and Technology, to be Published Sept. 2012, Oxford Press.

Selected Journals and Refereed Conference Papers

  1. Nasr GG,  Sharief  RA and  Yule AJ   High pressure spray cooling of a moving surface, Trans. ASME, J Heat Transfer, Vol. 128, No. 8, pp 752-760, 2006.
  2.  Sharief RA Nasr GG, and  Yule AJ  Steady state high-pressure spray cooling of high-temperature steel surfaces, Atomization and Sprays Journal,  pp171-191, Vol 17, 2007.
  3.  Akhtar SW, Nasr GG, and Yule AJ Characteristics of water droplet impaction behaviour on a polished steel heated surface: Part-I Atomization and Sprays Journal, pp 659-681, Vol 17, 2007.
  4.  Akhtar SW, Nasr GG, and Yule AJ Characteristics of water droplet impaction behaviour on a polished steel heated surface: Part-II, Atomization and Sprays Journal, pp 683-729, Vol 17, 2007.
  5. Nasr GG,  Burby ML, Yule AJ and Hughes T.A., Assessment of emergency safety showers against proposed EU and ANSI standards, Int. Journal of Multi-Phys, Nov. Vol. 2, 2008.
  6. Burby M, Nasr GG, and Yule AJ, Wheatly A, , Using PDA to validate the CFD of Novel Airblast Atomizers Designs, Int. Journal of Atomisation and Sprays, to be published 2010.
  7. Nasr GG, Yule AJ and Hughes T, The utilisation of fine sprays for Chemical, Biological, and Radiological or Nuclear (CBRN), Int Journal of Multi-phys, pp 61-72, Vol 3, 2009.
  8. Nasr GG, Yule AJ, Whitehead A and Hughes T, A new fine spray spill-return swirl atomizer, Journal of Mechanical Engineering Science, Proceedings of Institution of Mechanical Engineers, Part C, submitted, pub. Spring 2010.
  9. Nasr GG, Yule AJ and Hughes T, Utilisation of spill-return atomizer in health care, Journal of Mechanical Engineering Science, Proceedings of Institution of Mechanical Engineers, Part C, submitted, pub. Spring 2010.
  10. Burby M, Nasr GG, Yule AJ, Hughes T, Charaterisation of spray and coating using ultrasonic atomizers, Journal of Coating Technology, Spring 2010
  11. Nasr GG, Stewart J, Burby M, Spray coating using spill-return atomizer, Journal of coating technology, Spring 2010.
  12. Nagib M, Ezuka I, Burby M and Nasr GG, Simultaneous Production Of Oil And Gas Reserves From Single Wellbore, Submitted to SPE .
  13. Nagib M, Solumon I, Burby M and Nasr GG, Modelling of a Down hole Pulsating Device, Submitted to SPE
  14. Nagib M, Kumuyi  S, Burby M and Nasr GG, Analysis and Optimization of Shale Gas Production, Submitted to SPE .
  15. Abuseaba M., Nasr GG, Hughes R, Zero flaring of natural gas, SPE 2010
  16. Nasr GG, Yule AJ, Meter dose spray, Atomization and Sprays Journal, 2010 (Pending).
  17. Nasr GG, Burby and Yule AJ, Aerosol spray-1, Atomization and Sprays Journal, 2010 (Pending).
  18. Nasr GG, Burby M L and Yule AJ, Aerosol spray-2, Atomization and Sprays Journal, 2010 (Pending).
  19. El-Kamki M.A., Nasr GG, Utilisation of overlapping spray for descaling operation, SPE, 2010
  20. Sharief RA Nasr GG, Jeong, J-R, James, D.D., Widger, I.R, and  Yule AJ   Transient high pressure water spray cooling of a rotating steel plate at high temperature. Proc ILASS-Europe’99, ONERA, Toulouse, July 1999. 
  21. Nasr GG,  Sharief RA Jeong, J.R., and  Yule AJ   Studies of high pressure water sprays from full-cone atomizers.  Proc ILASS-Europe’99, ONERA, Toulouse, July 1999.
  22.  Sharief RA Nasr GG,  Yule AJ, Jeong, J.R., and James, D.D.  Steady state high pressure spray cooling of high temperature steel surfaces, Proc. ICLASS-2000, JPL, Pasadena, July 2000.
  23. Nasr GG,  Sharief RA Rho, S. and Yule A.J., Transient high pressure spray cooling of moving high temperature surfaces. Paper 8-11, Proc ICLASS 2003, Univ. Naples, Sorrento, July 2003.
  24. Nasr GG, Descaling of wellhead tubes using high pressure water atomizers, 19th ILASS-Europe, Nottingham University Sept 2004.
  25. Nasr GG, Yule, Abadllraham M, Transient cooling of moving surfaces: top and bottom spray, 19th ILASS-Europe, Nottingham University Sept. 2004.
  26. Burby ML and Nasr GG, Yule, A. J and Hughes, T., The effectiveness and performance of nozzles in emergency safety showers, Proceedings of the 20th ILASS-Europe 2005.
  27. Nasr GG and  Burby ML, Descaling from down-hole tubing of oil and gas wells using high pressure water, Proceedings of the 20th ILASS-Europe, 2005.
  28. Burby M L and Nasr GG, Spray characterisation and performance tests for an ultrasonic atomizer in the decontamination process, ICLASS, Kyoto, Japan, Aug.27-Sept.1, 2006.
  29. Nasr GG,  Burby ML, and Cox, T., Application of sprays in the painting and coating of materials with acoustic properties, ICLASS, Kyoto, Japan, Aug.27-Sept.1, 2006.
  30. Nasr GG and  Burby ML, Descaling from down-hole tubing of oil and gas wells using high pressure water, ICLASS, Kyoto, Japan, Aug.27-Sept.1, 2006.
  31. Nasr GG,  Burby ML, and Cox, T., Painting and Coating of Acoustic Materials, ASME Pressure Vessels and Piping Division Conference, July 23-27, 2006, Vancouver, BC, Canada.
  32. Nasr GG and Giri S, Descaling from down-hole tubing of oil and gas wells using high pressure water, 24th ILASS-Europe, Turkey, Sept. 2007.
  33. Nasr GG, Lloyd S, Whitehead A, The application of fine sprays for Chemical, Biological, and Radiological or Nuclear (CBRN) decontamination, 24th ILASS-Europe, Turkey, Sept. 2007.
  34. Nasr GG, Lloyd S, Yule AJ, Utilisation and performance analysis of fine sprays for disinfection within healthcare, 24th ILASS-Europe, Turkey, Sept. 2007.
  35. Nasr GG, Yule AJ, Whitehead A. The characterisation of the spray from a new fine spray spill return swirl atomiser, 24th ILASS-Europe, Turkey, Sept. 2007.
  36. Burby M L, Nasr GG, Hughes T., The design of emergency safety shower heads to comply with the proposed EU standard, 24th ILASS-Europe, Turkey, Sept. 2007.
  37. Burby M L, Nasr GG, Yule A.J., Wheatley A., Using PDA data to validate the CFD models of three airblast atomizer designs, 24th ILASS-Europe, Turkey, Sept. 2007.
  38. Nasr GG, Yule AJ, Burby M, Zekria M, Clarke J and Woodall D, Understanding the cleaning performance of high pressure sprays at long stand-off distances, 25th ILASS-Europe, Italy, 2008.
  39. Abuhesa M, Nasr GG, Hughes R, ‘Zero’ gas flaring, SPARC 2009, 10th Annual PG Conference, University of Salford, April 2009.
  40. El Kamki M and Nasr GG ‘Zero’ Descaling in gas and oil tubing, SPARC 2009, 10th Annual PG Conference, University of Salford, April 2009.
  41. Stewart J A, Nasr GG and Burby M L, Fine spray for disinfection purposes within healthcare environments, ICLASS 2009, 11th Triennial International Annual Conference on Liquid Atomization and Spray Systems, Vail, Colorado USA, July 2009.
  42. Nasr GG, Yule A J, Woodall D, Clark J, Cleaning performance of high pressure sprays at short and long stand-off distances, Triennial International Annual Conference on Liquid Atomization and Spray Systems, Vail, Colorado USA, July 2009.
  43. El Kamaki M A, Nasr GG, Burby M, Onyukwn E,  The characterisation of overlapping flat sprays for descaling oil and gas wells, Triennial International Annual Conference on Liquid Atomization and Spray Systems, Vail, Colorado USA, July 2009.
  44. Nasr GG, Stewart J A and Burby M, Spray characterization of glycerine_water mixture using spill-return atomizer (SRA), Triennial International Annual Conference on Liquid Atomization and Spray Systems, Vail, Colorado USA, July 2009.
  45. Nasr GG and Burby M, Spray characterization of flat overlapping sprays, ILASS2010, Brno, Czech Republic, Sept 2010.
  46. Stewart J A and Nasr G G, PDA measurement using spill-return atomizer,  ILASS2010, Brno, Czech Republic, Sept 2010.
  47. Stewart J A and Nasr GG, Spray coating using SRA, ILASS-America 2010, Ohio, USA, July 2010.

Publications Dr M.Burby

  1. Nasr G.G., Burby, M., Yule, A, J and Hughes, T., Assessment of Emergency Safety Showers against Proposed EU and ANSI standards, The International Journal of Multiphysics, Vol 2, No. 2, 2008.
  2. Burby, M., Ghasem, G, N., Yule, A, J and Morgan, L., Using PDA to Validate the CFD of Novel Airblast Atomizer Designs, International Journal of Gas Turbines Propulsion and Power Systems, (Pending review).
  3. Burby, M.L and Nasr, G.G, Yule, A. J and Hughes, T., The Effectiveness and Performance of Nozzles in Emergency Safety Showers, Proceedings of the 20th ILASS-Europe Meeting 2005.
  4. Burby, M.L and Nasr, G.G., Spray Characterisation and Performance Tests for an Ultrasonic Atomizer in the Decontamination Process, ICLASS,  Kyoto, Japan, Aug.27-Sept.1, 2006.
  5. Nasr, G.G, Burby, M.L., and Cox, T., Application of Sprays in the Painting and Coating of Materials with Acoustic Properties, ICLASS, Kyoto, Japan, Aug.27-Sept.1, 2006.
  6. Nasr, G.G and Burby, M.L., Descaling from Down-hole Tubing of Oil and Gas Wells using High Pressure Water, ICLASS,  Kyoto, Japan, Aug.27-Sept.1, 2006.
  7. Nasr, G.G, Burby, M.L., and Cox, T.,  Painting and Coating of Acoustic Materials, ASME Pressure Vessels and Piping Division Conference, July 23-27, 2006, Vancouver, BC, Canada.
  8. Burby, M.L and Nasr, G.G, Yule, A. J and Hughes, T., The Design of Emergency Shower heads to Comply with the Proposed EU standard, ILASS, Mulga, Turkey, Sept. 10-12, 2007.
  9. Burby, M.L and Nasr, G.G, Yule, A. J and Wheatley, A., Using PDA Data to Validate the CFD Models of Three Airblast Atomizer Designs, ILASS, Mulga, Turkey, Sept. 10-12, 2007.
  10. Nasr, G.G., Burby, M.L and Descaling of Wellhead Production Tubing Using High Pressure Water Atomizers, ILASS, Mulga, Turkey, Sept. 10-12, 2007.
  11. Nasr, G.G., Yule, A,J., Burby, M.L, and Giri, S., Understanding the Cleaning Performance of High Pressure Sprays at Long Stand-off Distances. G.G.Nasr , A.J.Yule, M. Burby and S.Giri, ILASS Turkey, 2007.
  12. Burby, M.L, Nasr, G.G, El kamiki, M, A and Onyukwu, E., The Characterisation of Overlapping Flat Sprays for Descaling Oil and Gas Wells, ICLASS Colorado 2009.
  13. Stewart, J, A., Nasr, G.G and Burby, M.L., Fine Spray for Disinfection Purposes within Healthcare Environments, ICLASS Colorado 2009.
  14. Burby, M.L, Nasr, G.G and Stewart, J, A., Spray Characterisation of Glycerine- Water Mixture Using a Spill-Return Atomiser, ICLASS Colorado 2009.

 Publication M.Nagib

  1. Nagib M, El Emam N, Bayoumi A, Review of Artificial Lift in Egypt, 14th EGPC Petroleum and Exploration Conference,  Cairo, October 1998 and 6th Mediterranean petroleum conference, Tripoli, Libya Nov. 1999 and 2000 SPE Asia Pacific Oil & Gas conference, Brisbane, Australia, October, 2000 SPE # 64508.
  2. Nagib M, El Emam N, Bayoumi A, Improving Reservoir Management of a Mature Field by Reservoir Characterization, 2000 SPE Asia Pacific Oil & Gas conference, Brisbane, Australia, October, 2000 SPE # 64283
  3. Nagib M, El Emam N, Bayoumi A, Guideline of Artificial Lift Selection for a Mature Field”, 2000 SPE Asia Pacific Oil & Gas conference, Brisbane, Australia, October, 2000 SPE # 64428
  4. Nagib M, Hussain A,Optimizing Field Performance using Reservoir Modelling and Simulation , 2001 SPE Permian Basin Oil & Gas Recovery conference and Rocky Mountain Petroleum Technology Conference Texas & Colorado, USA, May 2001 SPE # 70037
  5. Nagib M, Hussain A, Successful Application of ESP’s in a Very Corrosive Environment, Gulf Of Suez Area, Egypt (Case Study) , 2002 SPE Asia Pacific Oil & Gas conference, Melbourne, Australia, October, 2002 SPE # 77934.
  6. Nagib M, Hussain A Improving Field Recovery, Sweep Efficiency through Optimizing Gas Injection / Gas Production in a Complex Mature Field, 2002 SPE Asia Pacific Oil & Gas conference, Melbourne, Australia, October, 2002 SPE # 77921.
  7. Shahawi H, Nagib M, Enhanced C/O Saturation Monitoring Aids Water Flood Management - Case Studies from the Gulf of Suez, 2002 SPE Asia Pacific Oil & Gas conference, Melbourne, Australia, October, 2002 SPE # 77922.
  8. Nagib M, Moore J, Integration Tools to Streamline Reservoir Management and Field Development Workflows for Mature Fields in South Oman SPE # 93697, 2005 SPE, MEOS  Conference, held in Manama- Bahrain kingdom, published in JPT October 2005 edition and EPJT Special edition for Oman, Nov.,05.
  9. Nagib M, Batycky R, Results of Proactively Managing a Heavy-oil Waterflood in South Oman Using Streamline-Based Simulation”, 2006 SPE Asia Pacific Oil & Gas conference, Adelaide, Australia, September, 2006 SPE # 101195.
  10. Nagib M, Ezuka I, Burby M and Nasr GG, Simultaneous Production Of Oil And Gas Reserves From Single Wellbore, Submitted to SPE .
  11. Nagib M, Solumon I, Burby M and Nasr GG, Modelling of a Down hole Pulsating Device, Submitted to SPE .
  12. Nagib M, Kumuyi  S, Burby M and Nasr GG, Analysis and Optimization of Shale Gas Production, Submitted to SPE .